|
Runway / Taxiway Barricades : The Aviator |
|
|
|
|
 |
 |
|
|
 |
|
The Aviator Runway/Taxiway Barricade |
Click here to see photos of the Aviator Barricade in action!
Click here to download a Specification Sheet on the Aviator Barricade!
The 10"x96" Aviator Barricade was the original replacement for railroad ties on America's airports. With brand new upgrades in Fall 2008, like solar lights that 'thread on' at the fill caps and replaceable plastic rails for reflective sheeting, the Aviator Barricade now sets the standard by which other runway/taxiway barricades are measured.
- 10" tall x 10" wide x 96" long makes quick work of any runway or taxiway closure
- 432 square inches of reflective sheeting per side
- Each Aviator Barricade is capable of holding- two (2) OTW Solar CO1 lights and two (2) warning flags (both lights and flags are sold separately)
- Removable rails for orange and white reflective sheeting (sold separately) allow unparalleled flexibility - use with High Intensity, Engineer Grade or no sheeting, as required by the job. If sheeting gets damaged, simply replace rails (saves money on replacement barricades!)
- AIP eligible & meets FAA Advisory Circular AC150/5370-2E
- FOD Free, High Impact UV resistant polyethylene.
- Low center of gravity and large capacity for ballast (37 gallons equals 310 lbs. of water) resists tipping from jet/prop blasts and high winds.
- Patented U-connectors in the bottom of the barricade create a continuous line.
|
|
|
|
|
|
 |
|
|
|
 |
|
Reflective Rail for Aviator Barricade |
Removeable/replaceable reflective rails allow the ultimate in flexibility!
- 6" tall x 72" long rails in Orange & White reflective sheeting meet current guidelines of FAA Advisory Circular 150/5370-2E
- Available in either Engineer Grade (EG) or High Intensity (HI) sheeting
- Includes hardware to mount directly to the Aviator Barricade (nylon screws and washers to minimize FOD)
- 6 mil Coroplast® sign substrate (corrugated propolyene) does not decay like old fashion wooden rails
|
|
|
|
|
|
|
|
|
|
 |
|
D-Cell, Red, Airport Barricade Light |
Red, 360-Degree, LED D-Cell powered barricade marking light meets current guidelines of FAA Advisory Circular 150/5370-2E (even has Steady-On mode for use on US military or Canadian airfields)
- Photo-cell controlled to save battery life during daylight
- Bolts directly to The Aviator 10x96 Airport Barricades - up to two flashers per barricade (mounting bolts included)
- Requires only two D-Cell batteries (battery case holds up four batteries to double the time between battery changes)
|
|
|
|
|
|
|
|
|
|
 |
|
20" PVC Airport Barricade Flag |
Durable 20" x 20" PVC flag with 30" wooden dowel handle included
Two colors to choose from:
* Safety Orange
* White |
|
|
|
|
|
|
|
|